Join the Discord! →

Join hundreds of racers just like you! We love to help answer questions and race together.


Csw V2 Iracing Settings

Answers common csw v2 iracing settings problems for iRacing drivers. Quick, step-by-step fixes to get Fanatec CSW V2 recognized, FFB correct, and steering calibrated fast.

If you’re dealing with csw v2 iracing settings in iRacing, the short answer is: update the wheel firmware/drivers, pick the CSW V2 as your steering device in iRacing, then set rotation and FFB balance between the wheel base and in-sim sliders. You’re in the right place — below is a simple, actionable checklist.

Quick Answer — csw v2 iracing settings

Make sure the Fanatec firmware and drivers are current, confirm Windows/joined controller shows only one wheel device, select the CSW V2 inside iRacing’s Options → Controls, then tune rotation and Force Feedback (FFB) by using a mix of the wheel base’s profile and iRacing’s FFB slider until the feel is natural.

What’s Really Going On

iRacing reads whatever steering device Windows exposes. If the base is out of date, registered twice, or using wrong rotation/FFB scale, the sim will either not detect it or will give wrong force feedback and steering travel. Common symptoms: wheel not recognized, FFB too strong/weak, weird centering, or “double inputs” when Windows registers multiple controllers. Fixing this is mostly about getting drivers and device selection right, then balancing hardware (wheel base) versus software (iRacing) FFB settings.

Step-by-Step Fix

  1. Update firmware and drivers. Download the latest Fanatec drivers and firmware tool from Fanatec.com and run the update. Restart PC after.
  2. Check Windows sees one wheel. Open “Set up USB game controllers” (joy.cpl). If you see duplicates, unplug other controllers, or disable the extra device in Device Manager.
  3. Start iRacing and select the device. In iRacing go to Options → Controls and pick “Steering Wheel” device = ClubSport Wheel V2 (or similar). Save a new profile.
  4. Calibrate rotation. In the wheel base menu or Fanatec driver set the maximum rotation (e.g., 540°–900°) that matches the car you’ll drive. In iRacing, ensure steering range matches the wheel.
  5. Set initial FFB values. Set iRacing’s FFB slider around 40–60% as a starting point. Lower or raise the wheel base global strength to fine-tune. Test in a practice session and adjust until understeer/oversteer forces feel natural.
  6. If the wheel “snaps” or recenters badly, check Windows deadzone/calibration and reset iRacing controls to defaults, then reassign axes once.

Extra Tips / Checklist

  • Always restart after firmware or driver installs.
  • Use one source for FFB: set base strength conservatively and adjust iRacing slider, not both full.
  • If car steering feels off, verify steering rotation in both wheel menu and iRacing match.
  • Save different control profiles in iRacing per car/class.
  • If wheel still not detected, try a different USB port and disable power-saving on that USB hub.

FAQs

Q: Why does my CSW V2 show up twice in Windows?
A: Some Fanatec devices register multiple HID interfaces. If two active “game controllers” cause issues, disable the non-wheel interface in Device Manager or unplug unnecessary controllers.

Q: What FFB slider should I use for CSW V2 in iRacing?
A: Start around 40–60% in iRacing, then tweak the wheel base overall strength down or up. There’s no one perfect number — aim for clear road feel without clipping.

Q: Wheel won’t centre after a crash. How do I fix it?
A: Recenter the wheel using base controls, check Windows calibration (joy.cpl), and reset the iRacing control profile if needed.

Q: Do I need Fanatec Control Panel open?
A: You don’t need it open constantly, but use it for firmware, rotation, and base-strength settings before launching iRacing.

Short Wrap-Up

Get firmware/drivers current, confirm the CSW V2 is the selected steering device in iRacing, and balance rotation plus FFB between the base and the sim. Test in a practice session and make small iterative changes — you’ll fix most csw v2 iracing settings problems in 10–20 minutes.