Join hundreds of racers just like you! We love to help answer questions and race together.

How to Get Triple Screen Working With Iracing

Calm guide for iRacing beginners: how to get triple screen working with iRacing. Step-by-step setup, quick fixes, and simple iRacing tips to start fast today.

If you’ve opened iRacing and felt lost when your monitors didn’t line up, you’re not alone. Many new to iRacing worry their hardware or settings are broken — the truth is it’s usually a few clear steps. This article shows a calm, practical path so you can drive with a true triple-monitor view.

Quick Answer

To get triple screens working in iRacing you set your graphics cards and Windows to extend displays, use your GPU control panel to align monitors, then enable triple-monitor or triple-screen view inside iRacing’s graphics options, set FOV and bezel correction, and restart the sim.

Why this matters for beginners

Triple-screen gives a wider, more natural field of view and better situational awareness — huge benefits when learning how iRacing works. For iRacing beginners, it’s tempting to skip the extra setup and stick to one screen, but once configured it’s a stable improvement to lap times and immersion.

how to get triple screen working with iracing (Simple Step-by-Step Guide)

Hardware check: Confirm your PC/GPU supports three monitors (or two GPUs supporting three outputs). Use identical resolution/refresh rates where possible for smoother visuals.
Windows/GPU setup: In Windows Display Settings choose “Extend these displays.” In NVIDIA Control Panel or AMD Radeon Settings arrange the monitors so their onscreen positions match your physical layout.
iRacing graphics: Open iRacing Options → Graphics. Choose “Triple Monitor” or set the center and left/right screen sizes manually. Set the overall resolution to match the combined width (e.g., 3 × 1080p = 5760×1080).
FOV and bezel correction: Measure monitor bezel widths (or use a simple ruler) and enter bezel correction. Adjust Field of View (FOV) using iRacing’s FOV calculator or by eye so objects feel proportionally correct.
Restart and test: Restart iRacing after saving. Join a test session and check side views, mirrors, and horizon for continuity. Tweak bezel/FOV until it feels natural.

Common Mistakes

Wrong display mode: Using “Duplicate” instead of “Extend” in Windows — fix: change to Extend.
Mixed refresh rates/resolutions: Causes stutter when turning — fix: match refresh rates or run all monitors at their native common rate.
Forgetting bezel correction: Images look chopped or misaligned — fix: measure and enter bezel values in iRacing’s graphics options.

Quick Pro Tips

If you’re new to iRacing, start with identical monitors for easiest setup.
Use the iRacing FOV calculator (or community tools) — correct FOV beats guessing.
Turn off GPU scaling and set monitors to full-pixel mode in the control panel.
Save your profile in iRacing after working settings so you can revert quickly.
Key iRacing tips: practice in a test session (no pressure) and iterate settings in small steps.

FAQs

Q: Do I need multiple GPUs to run triple screens? A: Not necessarily. Many modern GPUs support three outputs. Check your GPU’s spec and available ports first.

Q: Will triple screens reduce FPS? A: Yes, rendering a wider resolution is heavier. Lower some graphical settings or enable dynamic super resolution carefully.

Q: My mirrors are wrong on the side screens — what now? A: Check the monitor order in Windows and the in-sim mirror field-of-view settings; incorrect bezel/FOV values are the usual cause.

Q: Where can I ask for help? A: Try the iRacing forums, and friendly iRacing Discord communities are great for screenshots and real-time troubleshooting.

Final takeaways Triple-screen setup is mostly about proper display extension, matching resolutions/refresh rates, and tuning FOV/bezel correction. Try the step-by-step guide in a short test session today and join an iRacing community if you want a quick screenshot review. You’ll be surprised how quickly it improves your driving.